• An overtemperature sensor preventively shuts off the unit in a dangerous heat-up situation – particularly valuable in case of continuous operation
• Choose between different shaking motions, orbits, angles and load capacities: the right model for your specific application
• With transparent PETG incubation hood, which excludes condensate formation, for full visual control of the reaction
• The temperature-insulated drive prevents heating of the platform and thus damage to thermally sensitive samples
• Access with the flick of a hand: The hood folds up and remains in any position without extra locking
• Thanks to their low centre of gravity, the shakers will not slide off the table even with moist surfaces

Platform shakers, orbital vibrating

Titramax 100 – The compact model

• Titramax 100 is a compact and space saving unit that accepts load capacities of 2 kg and space for 4 microtiter plates
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350 rpm
• The 1.5 mm vibration orbit performs gentle mixing with best results using small sample volumes

Titramax 101 – The strong model

• Includes all Titramax 100 features, plus:
• The 3 mm vibration orbit accomplishes better results with higher volume samples than the Titramax 100 to yield consistent mixing of samples in the plate

Titramax 1000 – The incubating model

• Includes all Titramax 100 features, plus:
• The use of 6 microtiter plates increases your throughput by 50 %
• The 1.5 mm vibration orbit performs gentle mixing with best results using small sample volumes
• Titramax 1000 is a medium sized model and accepts load capacities of 5 kg
• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65 °C

Vibramax 100 – The compact model

• A large selection of attachments is provided fort he use od various vessels and sizes
• Vibramax 100 is a compact and space saving unit with a load capacity of 2 kg
• The 3 mm vibration orbit gives excellent results especially in large vessels – allows for smooth to ridged mixing of viscous media and solids
• Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350 rpm
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Optional attachments with tension rollers accepts any glassware size

Vibramax 110 – The efficient model

• Includes all Vibramax 100 features, plus:
• The shaking orbit of 1.5 mm performs a gentle motion for sensitive samples
• Set and continuously adjust the variable speed on the analog control knob from 150 to 2,500 rpm
• Ideal for the optional attachments to use 49 test tubes that increases your throughput significantly

Rotamax 120 – The compact model

• Rotamax 120 is a compact and space saving unit that accepts load capacities of 2 kg
• The shakingorbit of 20 mm performs a gentle motion for sensitive samples and supports culture plates and Erlenmeyer flasks
• Set and continuously adjust the variable speed on the analog control knob from 20 to 300 rpm
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Wide range or accessories, attachments and clamps for up to 16 Erlenmeyer flasks available

Unimax 1010 – The incubating model

• Includes all Rotamax/Unimax features, plus:
• This model is suitable fort he modular incubator system and is recommended for applications which require variable temperature control up to 65°C
• The shaking orbit of 10 mm performs a gentle motion for sensitive samples and supports culture plates and Erlenmeyer flasks
• Set und continuously adjust the variable speed on the digital display from 30 to 500 rpm
• Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Unimax 1010 is a medium sized model and accepts load capacities of 5 kg
  

Unimax 2010 – The resilient model

• Includes all Unimax 1010 features, plus:
• The shaking orbit of 20 mm performs a gentle motion for sensitive samples and supports culture plates and Erlenmeyer flasks
• Set and adjust continuously variable speed on the digital display from 20 to 400 rpm
• Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Increase your sample throughput with the optional multi-tier attachment for a variety of vessel sizes
• The Unimax 2010 is a large model and accepts a load capacity of 10 kg for high sample throughput

Promax 1020 – The incubating model

• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control up to 65 °C
• Wide range of accessories, attachments and clamps for separatory funnels available
• With a stroke length of 32 mm the Promax model performs an ideal motion for separatory funnels
• Set and continuously adjust the variable speed on the digital display from 30 to 250 rpm
• Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Promax 1020 is a medium sized model and accepts load capacities of 5 kg

Promax 2020 – The resilient model

• Includes all Promax 1020 features, plus:
• With a stroke length of 20 mm this Promax model can mix larger volumes with ease
• Set and continuously adjust the variable speed on the digital display from 20 to 400 rpm – ideal for separations
• Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Promax 2020 is a large model land accept a load capacity of 10 kg for high sample throughput

Duomax 1030 – The incubating model

• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature settings
• Choose your angle between these two options:
  tilt angle of 5° for soft and gentle movements or
  tilt angle of 10° for a much stronger motion
• Set and continuously adjust the variable speed on the analog control knob from 2 to 50 rpm – ideal for media bottles
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Duomax 1030 is a medium sized model and accepts load capacities of 5 kg

Polymax 1040 – The incubating model

• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control up to 65°
• Choose your angle between these two options:
  tilt angle of 5° for soft and gentle movements or
  tilt angle of 10° for a much stronger motion
• Use this model for any vessel – from culture plates, media bottles and Erlenmeyer flasks – there is no limit
• Set and continuously adjust the variable speed on the analog control knob from 2 to 50 rpm – ideal for cell culture plates
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Polymax 1040 is a medium sized model and accepts load capacities of 5 kg

Polymax 2040 – The resilient model

• Includes all Polymax 1040 features, plus:
• Set and continuously adjust the variable speed on the digital display from 2.5 to 50 rpm – ideal for cell culture plates
• Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Polymax 2040 is a large model and accepts load capacity of 10 kg for high sample throughput

This truly unique gives you all in one: Shaking, mixing and heating with visual reaction control at all times. These platform shakers are compatible with the incubator system: Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010 und Promax 1020

• Heating module allows for gentle temperature adjustments up to 65°C
• Electrical heater allows for quick and even temperature distribution throughout the entire enclosure
• Unlimited visual reaction control at all times: The transparent and non – fogging PETG construction offers it all
• Three otions available: A flat hood for small vessels and mictrotiter plates, a high hood for all common medium sized vessels and even a high hood XL for larger Erlenmeyer flasks up to 2,000 ml
• Immediate access: The incubator hood opens instantly and interlooks in any position
• Use ONE icubator for numerous shakers – interchangeability is ensured and takes less than 2 minutes. You can incubate and mix simultaneously or independently

Heating module

• Heating capacity of 300 W allows for quick temperature adjustment
• Digital temperature settings up to 65°C and separate display for actual temperature
• To protect your sample from thermal damages this unit features a safety circuit to prevent overheating
• Electrical heater comes with low – noise blower and provides accuracy of ±2°C up to 50°C and ±4°C over 50°C

Titramax package
This package includes:
1 × vibrating platform shaker Titramax 1000
1 × heating module and
1 × flat incubator hood

Unimax package
This package includes:
1 × orbital platform shaker Unimax 1010
1 × heating module and
1 × high incubator hood