Milli-Q® SQ 240C Water Purification System (Tap to Ultrapure)

La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.

 

The Milli-Q® SQ 240C Water Purification System is connected to the tap water supply. Installation can be carried out flexibly and cost-effectively by the user. 
In the first purification step, up to 42 liters of reverse osmosis water (type 3) are produced per hour, which allows the tank (3.5 liters) to be filled in approximately 6 minutes. 
In the second purification step, ultrapure water (type 1) is produced. The TOC content is reduced here by an integrated UV photo-oxidation lamp. The ultrapure water quality with a specific resistivity of 18.2 MΩ·cm (corresponding to a conductivity of 0.055 µS/cm) is indicated by a colored LED.
The ergonomic hand dispenser can be adjusted from a dispensing rate of 1.6 liters per minute to drop-by-drop dispensing.

Thanks to the practical twist & lock design, purification cartridges and final filter can be easily replaced. 
In addition, the UV lamp does not need to be replaced thanks to its long lifetime.

The Milli-Q® SQ 240C Water Purification System is a product developed in accordance with Design for Sustainability (DfS). For example, the reverse osmosis recirculation loop saves up to 50% of reject water. At the same time, it requires very little space (height, width, and depth including hand dispenser): 63 cm x 53 cm x 22 cm. 

This catalog number does not include: 
SQPAK™ purification cartridges or final filter and the power cord for the respective local power supply.

Standard Configuration:
Power Cord (Germany & Austria) FTPF01866
SQPAK™ RO Cartridge SQPAKPR0M1
SQPAK™ Quanta Cartridge SQPAKQUAM1
SQPAK™ 0.22 µm Final Filter SQPAKFINM1

Depending on the application, different SQPAK™ pretreatment cartridges or final filter can be used:
SQPAK™ TOC Quanta Cartridge SQPAKT0CM1 instead of SQPAK™ Quanta Cartridge SQPAKQUAM1
Total organic carbon (TOC): ≤ 5 ppb

SQPAK™ Bio Final Filter (Ultrafiltration) SQPAKBI0M1 instead of SQPAK™ 0.22µm final filter SQPAKFINM1
Bacteria: ≤ 10 CFU/L (typically ≤ 1 CFU/L)
Pyrogens (endotoxins): < 0.001 EU/mL
RNases: < 1 pg/mL
DNases: < 5 pg/mL
Proteases: < 0.15 μg/mL

For optimum performance, feed water with a pressure of 2-3 bar and free chlorine < 0.5 ppm is required.
- For high feed water pressure, we recommend using the optional Milli-Q® Pressure Regulator ZFMQPR3BT0.
- For low or high feed water pressure, or high levels of free chlorine, we recommend using the optional Milli-Q® Prefilter Module ZSR240PFT0.

A 3-year warranty extension ZWSQ2S3EXW and water sensor ZWATSENA1 are also available as options.