Automated Drain & Refill System
La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.
ADR Automated Drain & Refill System
Temperature range: -45 ... 150 °C
fluid connection: M38x1,5 male
compressed air (max) 4 bar
Power supply: 90-240V 1~/2~ 50/60Hz
Useable: Free-Standing Unistats, Unimotive and Unichiller Tower
Heat transfer fluids: water-ethylene glycol mixtures
Solenoid valves: electrically controlled
Please note:
Please specify the used device with serial number when ordering.
Safety device against overpressure not included in the scope of delivery.
The connection of the fluid return line to the temperature control system must be carried out by others.
No excess pressure is permitted in the TCU during the active return of the liquid, i.e. a pressure equalisation must have been completed prior to the return of the fluid to the expansion vessel.
+ info Temperature range: -45 ... 150 °C
fluid connection: M38x1,5 male
compressed air (max) 4 bar
Power supply: 90-240V 1~/2~ 50/60Hz
Useable: Free-Standing Unistats, Unimotive and Unichiller Tower
Heat transfer fluids: water-ethylene glycol mixtures
Solenoid valves: electrically controlled
Please note:
Please specify the used device with serial number when ordering.
Safety device against overpressure not included in the scope of delivery.
The connection of the fluid return line to the temperature control system must be carried out by others.
No excess pressure is permitted in the TCU during the active return of the liquid, i.e. a pressure equalisation must have been completed prior to the return of the fluid to the expansion vessel.
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | No |
- Fabricante: Huber
- Artículo-núm.: 3602.0001.00
- Paquete: 1 Pieza
- Validez: 31.12.2026
- Última actualización: 31.12.2025