CO2-Incubator ICO50med, 56l, 18-50°C, CO2 control 0-20%

CO2-Incubator ICO50med, 56l, 18-50°C, CO2 control 0-20%
La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.
Información: (-)
  • (Haga clic aquí para obtener más información)
 
Número de artículo.: ICO50med 9.027,92 € para 1 Pieza más IVA (21%) más costes de envío
CO2 Incubator ICO50med, medical device, TwinDISPLAY, 56 l, working-temperature range 5 °C above ambient temperature to 50 °C, setting range 18 °C to 50 °C, with CO2 control - with dual beam NDIR system - adjustable from 0 % - 20 %, humidity limitation by a Peltier element, when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2,5 %, electronic microprocessor temperature controller with Pt100 and auto-diagnostic system, fully insolated stainless steel door and heated inner glass door, all-round heating on 6 sides, stainless steel housing and interior; with 1 water dish, with 1 stainless steel shelf; multiple overtemperature protection/undertemperature alarm, standard sterilisation programme; works calibration certificate at +37 °C, 5 % CO2; textured stainless steel exterior: 559 x 795 x 521 mm; stainless steel interior: 400 x 425 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1100 W
+ info
(-) Datos técnicos:
Volumen nominal: 56 l
Unidad de refrigeración disponibles: 25 °C
Maximum operating temperature: 50 °C
(-) Compliance information:
WEEE obligation: Sí
WEEE registration number: DE66812464
WEEE brand according to EAR register: Memmert
WEEE type of equipment: Large equipment for use in other than private households only

Accesorios:

  • ICO50medB04714
    External measuring instrument with additional measuring head for temperature and
  • ICO50medB29744
    Stacking set (4 pcs) for stacking of appliances of same size
  • ICO50medB33170
    USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (Use
  • ICO50medB33504
    Subframe (622 mm high) adjustable in height (sizes 150/240: should not be used f
  • ICO50medB33507
    Subframe (130 mm high); sizes 150/240: only in combination with the correspondin
  • ICO50medB38737
    Water dish
  • ICO50medD00124
    IQ/OQ/PQ checklist
  • ICO50medD38897
    IQ/OQ document incl. empty chamber distribution measurement according to DIN 128
  • ICO50medE02087
    CO2 pressure reducing valve to DIN 8546, incl. gas cylinder monitor
  • ICO50medE06189
    Ethernet connection cable 5 m for computer interface
  • ICO50medE06192
    USB-Ethernet adapter
  • ICO50medE35160
    Perforated stainless steel shelf
  • ICO50medFDAQ1
    Basic licence for AtmoCONTROL FDA and myChamber Control FDA. Meets the requireme
  • ICO50medZWVR6
    Central water supply, with filter cartridges for connection to the domestic wate
  • ICO50medZWVR7
    Central water supply, without filter cartridges for connection to the domestic w

 

Options:

  • ICO50medD00106
    Calibration // three CO2 values (5% CO2, 7% CO2, 10% CO2 at +37 °C)
  • ICO50medD00131
    Calibration // temperature, humidity and CO2 value - freely selectable
  • ICO50medD00143
    Calibration // temperature, humidity, CO2 and O2 value - freely selectable
  • ICO50medF7
    Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by si
  • ICO50medK6
    Capacitive humidity sensor for measuring and displaying the relative humidity
  • ICO50medK7
    Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh),
  • ICO50medT2
    Electropolished interior
  • ICO50medT6
    Control of oxygen concentration by introducing nitrogen; setting range 1–20% O2;
  • ICO50medX2
    Voltage 115 V, 50/60 Hz