CO2-Incubator ICO240med, 241l, 18-50°C, CO2 control 0-20%

CO2-Incubator ICO240med, 241l, 18-50°C, CO2 control 0-20%
La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.
Información: (-)
  • (Haga clic aquí para obtener más información)
 
Número de artículo.: ICO240med 16.497,34 € para 1 Pieza más IVA (21%) más costes de envío
CO2 Incubator ICO240med, medical device, TwinDISPLAY, 241 l, working-temperature range 5 °C above ambient temperature to 50 °C, setting range 18 °C to 50 °C, with CO2 control - with dual beam NDIR system - adjustable from 0 % - 20 %, humidity limitation by a Peltier element, when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2,5 %, electronic microprocessor temperature controller with Pt100 and auto-diagnostic system, fully insolated stainless steel door and heated inner glass door, all-round heating on 6 sides, stainless steel housing and interior; with 1 water dish, with 2 stainless steel shelves; multiple overtemperature protection/undertemperature alarm, standard sterilisation programme; works calibration certificate at +37 °C, 5 % CO2; textured stainless steel exterior: 759 x 1180 x 691 mm; stainless steel interior: 600 x 810 x 500 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1650 W
+ info
(-) Datos técnicos:
Volumen nominal: 241 l
Unidad de refrigeración disponibles: 25 °C
Maximum operating temperature: 50 °C
(-) Compliance information:
WEEE obligation: Sí
WEEE registration number: DE66812464
WEEE brand according to EAR register: Memmert
WEEE type of equipment: Large equipment for use in other than private households only

Accesorios:

  • ICO240medB04714
    External measuring instrument with additional measuring head for temperature and
  • ICO240medB33170
    USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (Use
  • ICO240medB33506
    Subframe (622 mm high) adjustable in height (sizes 150/240: should not be used f
  • ICO240medB33509
    Subframe (130 mm high); sizes 150/240: only in combination with the correspondin
  • ICO240medB38737
    Water dish
  • ICO240medD00124
    IQ/OQ/PQ checklist
  • ICO240medD38897
    IQ/OQ document incl. empty chamber distribution measurement according to DIN 128
  • ICO240medE02087
    CO2 pressure reducing valve to DIN 8546, incl. gas cylinder monitor
  • ICO240medE06189
    Ethernet connection cable 5 m for computer interface
  • ICO240medE06192
    USB-Ethernet adapter
  • ICO240medE35158
    Perforated stainless steel shelf
  • ICO240medFDAQ1
    Basic licence for AtmoCONTROL FDA and myChamber Control FDA. Meets the requireme
  • ICO240medGA3Q5
    Warranty extension by 1 year // Im, Um, S: Appliance sizes: 450, 750; ICOmed: Ap
  • ICO240medZWVR6
    Central water supply, with filter cartridges for connection to the domestic wate
  • ICO240medZWVR7
    Central water supply, without filter cartridges for connection to the domestic w

 

Options:

  • ICO240medD00106
    Calibration // three CO2 values (5% CO2, 7% CO2, 10% CO2 at +37 °C)
  • ICO240medD00131
    Calibration // temperature, humidity and CO2 value - freely selectable
  • ICO240medD00143
    Calibration // temperature, humidity, CO2 and O2 value - freely selectable
  • ICO240medF7
    Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by si
  • ICO240medK4
    Heated inner door with partitioned glass doors; sizes 105/150/240 has 2/3/4 part
  • ICO240medK6
    Capacitive humidity sensor for measuring and displaying the relative humidity
  • ICO240medK7
    Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh),
  • ICO240medT2
    Electropolished interior
  • ICO240medT6
    Control of oxygen concentration by introducing nitrogen; setting range 1–20% O2;
  • ICO240medX2
    Voltage 115 V, 50/60 Hz