MultiDrive control, Universal mill
La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.
MultiDrive control, Universal mill
Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube. There is a USB interface available for easy actuation and documentation.
High performance
Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output.
Interval operation
The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse
crushing of hard samples or for extra thorough blending.
Integrated cooling
A cooling system is integrated in the milling chambers (MI, available as accessory), which allows indirect heat dissipation. Thus, coolant and sample remain separate.
TFT-display
A clear TFT-display guarantees user-friendly operation.
Weighing function
The weighing function is also integrated into the user-friendly workflow of IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.
Variety of vessels (accessory)
MultiDrive provides the right vessel for each grinding task. For MultiDrive control, milling chambers (MI) for dry grinding, blending vessels (BL) for wet grinding, dispersing vessels (DI) with rotor-stator system as well as autoclavable milling tubes (MT 150) and blending tubes (BT 250).
Additionally, there are vessels with temperature measurement (T). A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating.
The vessels are not part of the scope of delivery.
+ info Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube. There is a USB interface available for easy actuation and documentation.
High performance
Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output.
Interval operation
The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse
crushing of hard samples or for extra thorough blending.
Integrated cooling
A cooling system is integrated in the milling chambers (MI, available as accessory), which allows indirect heat dissipation. Thus, coolant and sample remain separate.
TFT-display
A clear TFT-display guarantees user-friendly operation.
Weighing function
The weighing function is also integrated into the user-friendly workflow of IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.
Variety of vessels (accessory)
MultiDrive provides the right vessel for each grinding task. For MultiDrive control, milling chambers (MI) for dry grinding, blending vessels (BL) for wet grinding, dispersing vessels (DI) with rotor-stator system as well as autoclavable milling tubes (MT 150) and blending tubes (BT 250).
Additionally, there are vessels with temperature measurement (T). A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating.
The vessels are not part of the scope of delivery.
| (-) Datos técnicos: | |
|---|---|
| Esterilidad: | No |
| Código EAN: | 4053411050276 |
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Sí |
| WEEE registration number: | DE66784213 |
Accesorios:
- 0010006577
Documents for qualification, for laboratory equipment - 0010006579
Factory Calibration Certificate, for laboratory equipment - 0010006581
IQ/OQ Documentation, for laboratory equipment - 0010010524
General Certificates (2.2 oder 3.1), for laboratory equipment - 0010010802
Qualification Execution (IQ/OQ), for laboratory equipment - 0020023166
MultiDrive MI 250.1, Standard beater, stainless steel - 0020023167
MultiDrive MI 250.2, Star shaped cutter, stainless steel - 0020023168
MultiDrive MI 250.3, Beater, tungsten carbide - 0020023169
MultiDrive BL 2000.1, Standard blend knife, stainless steel - 0020023170
MultiDrive MI 400.1, Standard beater, stainless steel - 0020023171
MultiDrive MI 400.2, Star shaped cutter, stainless steel - 0020023172
MultiDrive MI 400.3, Beater, tungsten carbide - 0020023173
MultiDrive MT 150.5, Milling tube, autoclavable, 150 ml (incl. TS 1) - 0020023174
MultiDrive BT 250.5, Blending tube, autoclavable, 250 ml (incl. TS 1) - 0020023489
MultiDrive TC 1, Protective housing for MultiDrive MT 150 and BT 250 - 0020023490
MultiDrive TS 1, Spare seal with reactivation code - 0020112097
MultiDrive MI 250-S, Milling chamber, 250 ml, sealed - 0020112098
MultiDrive MI 250-T-S, Milling chamber, 250 ml, temperature measurement, sealed - 0020112099
MultiDrive MI 400-S, Milling chamber, 400 ml, sealed - 0020112100
MultiDrive MI 400-T-S, Milling chamber, 400 ml, temperature measurement, sealed - 0020113275
MultiDrive CS 1, Spare filter fume for cover - 0025003960
MultiDrive DI 2000-T, Dispersing vessel, 2000 ml, temperature measurement - 0025003962
MultiDrive BL 2000-T, Blender vessel, 2000 ml, temperature measurement
-
- Fabricante: IKA
- Artículo-núm.: 0025002643
- Categoría: Accesorios para molinos
Show all Accesorios para molinos from IKA - Validez: 31.10.2026
- Última actualización: 04.06.2026