LaboStar PRO DI 4
La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.
LaboStar PRO DI 4 -mobile ultra pure water system with 7l-tank, 1,5 l/min
HIGHEST WATER QUALITY
The extremely space-saving LaboStar PRO DI 4 ultrapure water system for the cost-effective production of analytically pure water can be used as a mobile benchtop instrument.
The water quality with a conductivity of 0.055 µS/cm, corresponding to 18.2 MΩ-cm, and a TOC content 5-10 ppb exceeds the common quality standards.
Deionized water, distilled water or permeate from a reverse osmosis system is required as feed water for the LaboStar PRO DI 4. This is filled manually into the integrated 7 l tank. After refilling the tank, the ultrapure water is available within minutes.
In the LaboStar units, a polisher module with a selection of the purest treatment materials ensures the ultrapure water quality. A conductivity measurement in the recirculation constantly monitors the purity of the product water.
A 0.2 µm sterile filter with bacterial and endotoxin retention capacity is located on the dispenser. The user can produce water with an endotoxin content of < 0.001 EU/ml without investing in an ultrafilter. A 0.2 µm filter without endotoxin retention is also available.
The LaboStar systems are delivered ready to use, including the first set of modules and filters.
Technical specifications
Ultrapure water specifications:
Dispense rate: 1.5 l/min
Conductivity at 25ºC: 0.055 µS/cm
Resistivity at 25ºC: 18.2 MOhm-cm
TOC: 5-10 ppb
Bacteria**: < 0,1 CFU/ml
Endotoxins**: < 0.001 EU/ml
Particulates >0.2 µm/ml: < 1
**with charged sterile filter
Feed water specifications:
Pressure: 0 bar
Conductivity: < 20 µS/cm
Colloid index (SDI): < 3
CO2: < 15 mg/l
Free Chlorine: < 0.1 mg/l
Total Iron: < 0.1 mg/l
SiO2: 2 ppm
Temperature: 5 - 30ºC
Mains input: 100-240 V, 50-60 Hz
Power consumption: max. 270 W
Water connection:
1/2" or 3/4" female thread
Power lead with plug (D;GB;USA):
1.5 m / 1.7 m
Dimensions and Weight:
Height: 535 mm
Width: 400 mm
Depth: 520 mm
Dispatch weight: 22 kg
+ info HIGHEST WATER QUALITY
The extremely space-saving LaboStar PRO DI 4 ultrapure water system for the cost-effective production of analytically pure water can be used as a mobile benchtop instrument.
The water quality with a conductivity of 0.055 µS/cm, corresponding to 18.2 MΩ-cm, and a TOC content 5-10 ppb exceeds the common quality standards.
Deionized water, distilled water or permeate from a reverse osmosis system is required as feed water for the LaboStar PRO DI 4. This is filled manually into the integrated 7 l tank. After refilling the tank, the ultrapure water is available within minutes.
In the LaboStar units, a polisher module with a selection of the purest treatment materials ensures the ultrapure water quality. A conductivity measurement in the recirculation constantly monitors the purity of the product water.
A 0.2 µm sterile filter with bacterial and endotoxin retention capacity is located on the dispenser. The user can produce water with an endotoxin content of < 0.001 EU/ml without investing in an ultrafilter. A 0.2 µm filter without endotoxin retention is also available.
The LaboStar systems are delivered ready to use, including the first set of modules and filters.
Technical specifications
Ultrapure water specifications:
Dispense rate: 1.5 l/min
Conductivity at 25ºC: 0.055 µS/cm
Resistivity at 25ºC: 18.2 MOhm-cm
TOC: 5-10 ppb
Bacteria**: < 0,1 CFU/ml
Endotoxins**: < 0.001 EU/ml
Particulates >0.2 µm/ml: < 1
**with charged sterile filter
Feed water specifications:
Pressure: 0 bar
Conductivity: < 20 µS/cm
Colloid index (SDI): < 3
CO2: < 15 mg/l
Free Chlorine: < 0.1 mg/l
Total Iron: < 0.1 mg/l
SiO2: 2 ppm
Temperature: 5 - 30ºC
Mains input: 100-240 V, 50-60 Hz
Power consumption: max. 270 W
Water connection:
1/2" or 3/4" female thread
Power lead with plug (D;GB;USA):
1.5 m / 1.7 m
Dimensions and Weight:
Height: 535 mm
Width: 400 mm
Depth: 520 mm
Dispatch weight: 22 kg
| (-) Datos técnicos: | |
|---|---|
| Descripción de tipo de producto: | LaboStar PRO DI 4 |
| Marca Registrada: | Evoqua® |
| Conductividad agua deionizado: | 0,055 µS/cm |
| Conductividad del agua de alimentación: | 20 µS/cm |
| Tasa de producción de agua pura: | 1,5 l/h |
| Valor TOC: | 5-10 ppb |
| Filtración ultra: | No |
| Monitor TOC: | Sí |
| Suministro de voltaje: | 110 V AC |
| Suministro de voltaje: | 240 V AC |
| Anchura: | 400 mm |
| Profundidad: | 410 mm |
| Altura: | 535 mm |
| Water Purification Technology: | Ultrafiltration |
| Irridiación UV: | No |
| AC power plug: | Schuko (type F) |
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Sí |
| WEEE registration number: | DE 91825945 |
| WEEE type of equipment: | Large equipment for use in other than private households only |
-
- Fabricante: Evoqua Water Technologies
- Artículo-núm.: W3T409684
- Categoría: Equipos de agua ultrapura
Show all Equipos de agua ultrapura from Evoqua Water Technologies - Paquete: 1 Pieza
- Validez: 31.12.2026
- Última actualización: 31.12.2025


