BOLA Stirring Shafts and Additional Blades, Bohlender

BOLA stirring shafts are made of a stainless steel shaft with PTFE shell and an all-PTFE stirring unit. The stainless steel core provides the required strength, allowing them to be clamped in the chuck. The medium comes into contact with PTFE only. The stirring shafts are resistant to nearly all chemicals and can be used at high temperatures.
Dimensions of the BOLA stirring shafts correspond to (KPG) glass stirring shafts, making them fully interchangeable.


(1) Discs

Length
mm

Shaft Ø
mm
Clamp Ø
mm
Stirring radius
mm
Order No.
350 642510 17 69812
350 643810 17 69816
3501085010 17 69822
6001085010 17 69826
3501087510 17 69832
6001087510 17 69836



(2) Crescents
Length
mm
Shaft Ø
mm
Clamp Ø
mm
Stirring radius
mm
Order No.
350 8 6.5 6524 17 37602
450 8 6.5 9024 17 37608
35010 8.0 9024 17 37612
45010 8.0 9024 17 37614
51010 8.0 9024 17 37616
60010 8.0 9024 17 37618
100010 8.0 9010 17 67619
8001614.012510 17 67622



(3) Propellers
Length
mm
Shaft Ø
mm
Clamp Ø
mm
VersionStirring radius
mm
Order No.
450 6 4.03-blades 5024 17 37808
350 8 6.53-blades 7524 17 37812
450 8 6.53-blades 7524 17 37814
45010 8.03-blades 5010 17 67817
45010 8.03-blades 7524 17 37818
60010 8.03-blades 7524 17 37820
80010 8.03-blades 7524 17 37822
60010 8.03-blades14024 17 39234
80010 8.03-blades14024 17 39240
120010 8.03-blades14010 17 69242
10001614.03-blades14010 17 69246
10001614.03-blades20010 17 69264
350 6 4.03-blades 2510 17 68212
350 6 4.03-blades 4010 17 68224
350 8 6.54-blades 5010 17 68418
60010 8.04-blades10010 17 68436



(4) Anchors
Length
mm
Shaft Ø
mm
Clamp Ø
mm
Stirring radius
mm
Order No.
350 8 6.540 × H 3510 17 68401
350 8 6.560 × H 4024 17 38402
450 8 6.580 × H 5010 17 68406
600 8 6.5100 × H 6024 17 38410
35010 8.080 × H 5010 17 68416
45010 8.080 × H 5010 17 68417
60010 8.0100 × H 6024 17 38424
80010 8.0100 × H 6010 17 68428
80010 8.0130 × H 8010 17 68448
10001614.0150 × H 12010 17 68458
12001614.0150 × H 12010 17 68464



(5) One paddle
Length
mm
Shaft Ø
mm
Clamp Ø
mm
Stirring radius
mm
Order No.
60010 8.011010 17 67908
10001614.014010 17 67918



(6) Centrifugal
Length
mm
Shaft Ø
mm
Clamp Ø
mm
Stirring radius
mm
Order No.
350 64.05010 17 67704
450108.09010 17 67714
600108.09010 17 67716



(13) BOLA Solo stirrer shafts

Stainless steel shaft, PTFE-coated, with welded-up bottom end. Perfectly suited as basic stirring shaft for fitting with BOLA additional stirrer blades which can be positioned on the shaft with a freely selectable height and sense of rotation. Can also be used for manual stirring.

 

Technical data:
Material:PTFE
Temperature resistance:-200°C up to +250°C
Chemical resistance:almost universal


Length
mm
Ø Shaft
mm
Clamp Ø
mm
Order No.
35010 8.010 17 67408
60010 8.010 17 67420
80010 8.010 17 67430
100010 8.010 17 67434
12001614.010 17 67440



Additional Blades

The ideal addition to the company's existing stirring shafts with a fixed stirring unit. Additional blades can be freely positioned in height and direction of rotation on any shaft with a diameter of 8 or 10 mm (a matching fork wrench is included with each additional blade). The blades themselves are made of PTFE while the fasteners are made of a special PTFE compound. High chemical and thermal resistance is thus guaranteed.
With this "building block system", users can assemble their very own stirrers as required.

Articlefor shaft-Ø
mm
Stirring radius
mm
Order No.
Propeller, three-blade 8 7524 17 44008
(7)Propeller, three-blade10 7524 17 44010
Maxi propeller, three-blade1014024 17 44110
Propeller, four-blade 8 5010 17 64808
(8)Propeller, four-blade1010010 17 64810
Propeller, four-blade1014010 17 64820
Propeller, four-blade1014010 17 64836
Propeller, four-blade1020010 17 64842
(9)Anchor1080 × H 5024 17 44516
Anchor10100 × H 6010 17 64520
Anchor16150 × H 12010 17 64544
Blade 8 8024 17 44608
(10)Blade10 8010 17 64610
Blade1011024 17 44612
Blade1614010 17 64616
(11)Impeller10 6010 17 64308
(12)Crescent10 9010 17 64210


vgkl_img

vgkl_img

vgkl_img

vgkl_img

vgkl_img

vgkl_img

vgkl_img

vgkl_img

vgkl_img

vgkl_img