SONOREX SUPER ultrasonic baths
- For aqueous cleaning agents
- Stainless steel vibration tanks, volumes 0.9 to 90.0 liters
- Drip-proof stainless steel housing
- Time setting 1 – 15 min, ± 5 %, or continuous operation (∞)
- Ultrasonic frequency 35 kHz
- RK 1028 CH and RK 1050 CH welded oscillation tanks made of stainless steel 1.4404
- RK 102 H oscillation tank hard chromium-plated
- RK 102 H and up with ball valve drain
- H types with heating, adjustable temperature range 30 – 80°C. RK 31 H: heating permanently set to 65°C
- Pulse function
- Operating voltage 230 V~ (±10 %), optionally 115 V~ (±10 %), 50/60 Hz
Ultrasonic max. output corresponds to four times higher value of the ultrasonic nominal power (5) SONOREX DIGITEC digital ultrasonic baths
- Mixing of samples
- Homogenisation of samples for analysis
- Rapid degassing of solvents for HPLC
- 4-step operation as "plug and clean"
- "H" units with heater for 20 to 80 °C, with adjustable temperature range, with LED for temperature and heating phase
- Warning LED for overheating
- Time setting 1, 2, 3, 4, 5, 10, 15, 30 min, ± 5 % or continuous operation (∞)
- DEGAS rapid degassing function – freely selectable sound pulse – with LED
- Stainless steel housing, spray-water proof, IP 33 protection thanks to permanently connected mains cable and liquid-proof front panel
- Sweep – continuous sound field oscillation for gentle, even cleaning
- RC version with infrared interface
- Automatic short-term ultrasound activation during heating to avoid retardation of boiling; can be switched off
- Automatic safety switch-off 12 hours after last button activation
- Pulse function
- Operating voltage 230 V~ (±10 %), optionally 115 V~ (±10 %), 50/60 Hz
- Fill level mark for safe dosing
- Outlet valve for easy emptying, one-piece welded outlet elbow
Ultrasonic max. output: corresponds to four times higher value of the ultrasonic nominal power Accessories as for RK units. SONOREX DIGITEC DT...-RC Units with Infrared Interface
| Type | Bath dimensions L × W × D mm | Bath vol. l | Ultrasonic max. output W | Ultrasonic nominal power W | Order No. | (6) | DT 102 H-RC | 240×140×100 | 3.0 | 480 | 120 | 10 07 33071 | | DT 255 H-RC | 300×150×150 | 5.5 | 640 | 160 | 10 07 33081 | | DT 510 H-RC | 300×240×150 | 9.7 | 640 | 160 | 10 07 33091 | | DT 514 BH-RC | 325×300×200 | 18.7 | 860 | 215 | 10 07 33095 |
Accessories for Digitec DT...-RC Units
| Article | Order No. | | WINSONIC® DT remote control | 10 07 33090 | | consisting of: software and infrared adapter IR 1 | |
SONOREX DIGIPLUS DL High-power ultrasonic baths with power control
- Cleaning of sensitive materials
- Mixing of samples
- Homogenizing of samples for analysis
- Fast degassing of solvents for HPLC
- Power control from 20 to 100%
- Heating 20 to 80 °C, with adjustable temperature range, LED
- Optical signal in case of excess temperature
- Automatic short-time ultrasound during heating up period to avoid delay in boiling – switch-off possible
- Time setting 1, 2, 3, 4, 5, 10, 15, 30 min, ± 5 % or continuous operation (∞)
- DEGAS – quick degassing
- Sweep – permanent sound field oscillation ensures even and gentle ceaning
- Automatical safety shut-down 12 hours after last keypress
- Marking of filling level for safe dosage
- Drain valve for simple emptying, one-piece welded drain bow
- Protection class IP 33 at highest possible level through liquid-tight mains cable and housing front without openings
| Type | Bath dimensions L × W × D mm | Bath vol. l | Ultrasonic max. output W | Ultrasonic nominal power W | Order No. | (7) | DL 102 H | 240×140×100 | 3.0 | 480 | 120 | 10 07 37180 | | DL 156 BH | 500×140×150 | 9.0 | 860 | 215 | 10 07 37181 | | DL 255 H | 300×150×150 | 5.5 | 640 | 160 | 10 07 37182 | | DL 510 H | 300×240×150 | 9.7 | 640 | 160 | 10 07 37183 | | DL 512 H | 300×240×200 | 13.0 | 860 | 215 | 10 07 37184 | | DL 514 BH | 325×300×200 | 18.7 | 860 | 215 | 10 07 37185 | | DL 1028 H | 500×300×200 | 28.0 | 1200 | 300 | 10 07 37186 |
SONOREX accessories for ultrasonic baths
Vessels or items to be cleaned may not be placed on he bottom of the tank! Stainless steel baskets - required accessories - for suspension in the tank. Stainless steel equipment holder, model GH 1 for 1 liter glass columns up to Ø 105 mm, other equipment holders bottom with mesh size 12,5 × 12,5 mm. DE perforated stainless steel cover for holding insert beakers (glass, plastic stainless steel). ES insert strips, hold 4 insert beakers, SH 28 C strainer holder for 5 test sieves. SH 7 = sieve holder for 1 test sieve. Sieve inserts fit insert containers. Insert baskets made of stainless steel
Equipment holder made of stainless steel
| Type | fits | Order No. | (10) | GH 1 | RK 52/H, DT 52/H RK 100/H, DT 100/H RK 102 H, DT 102 H/H-R RK 103 H, DT 103 H DL 102 H | 96 07 32009 | | SH 7 | RK 106, DT 106 | 96 07 32000 | | SH 28C | RK 1028 C/CH, DT 1028 CH | 96 07 31307 | (11) | GH 10 | RK 510/H, DT 510/H/H-RC, DL 510 H | 96 07 32001 | | GH 28 | RK/DT 1028/H, RK 1040, DL 1028 H | 96 07 32005 |
Lids made of stainless steel – when using insert baskets
| Type | fits | Order No. | | D 08 | RK 31/H, DT 31/H | 96 07 35016 | | D 52 | RK 52/H, DT 52/H | 96 07 33002 | (12) | D 100 | RK 100/102 H, RK 103 H, DT 100/H, DT 102 H/H-RC, DT 103 H, DL 102 H | 96 07 33003 | | D 6 | RK 106, DT 106 | 96 07 35005 | | D 156 | RK 156/BH, DT 156 BH, DL 156 BH | 96 07 33004 | | D 170 | RK 170 H | 96 07 33006 | | D 255 | RK 255/H, DT 255/H/H-RC, DL 255 H | 96 07 33007 | | D 510 | RK 510/H, RK 512 H, DT 510/H/H-RC, DT 512 H, DL 510 H, DL 512 H | 96 07 33008 | | D 514 | RK 514/H/BH, DT 514/H/BH/BH-RC, DL 514 BH | 96 07 33010 | | D 1028 | RK 1028/H, DT 1028/H, DL 1028 H | 96 07 33011 | | D 1028C | RK 1028 C/CH, DT 1028 CH mit K 28 C | 96 07 33012 | | D 40 | RK 1040 | 96 07 35020 | | D 1050 C | RK 1050/CH, DT 1050 CH mit K 50 C | 96 07 33013 |
Positioning lids made of stainless steel for holding insert beakers
| Type | fits | Order No. | | DE 8 | RK 31/H, DT 31/H | 96 07 36009 | | DE 52 | RK 52/H, DT 52/H | 96 07 33016 | (13) | DE 100 | RK 100/H, RK 102 H, RK 103 H, DT 100/H, DT 102 H/H-RC, DT 103 H, DL 102 H | 96 07 33017 | | DE 6 | RK 106, DT 106 | 96 07 36004 | | DE 156 | RK 156/BH, DT 156/BH, DL 156 BH | 96 07 33040 | | DE 255 | RK 255/H, DL 255 H, DT 255/H/H-RC | 96 07 33028 | | DE 510 | RK 510/H, RK 512 H, DT 510/H/H-RC, DT 512 H, DL 510 H, DL 512 H | 96 07 33038 | | DE 514 | RK 514/H/BH, DT 514/H/BH/BH-RC, DL 514 BH | 96 07 33039 | | ES 4 | RK 1028/H/C/CH, RK 1050/CH, DT 1028/H/CH, DT 1050 CH, DL 1028 H | 96 07 36010 |
Insert beakers
With holding ring and plastic cover for SD 06, EB 05 und PD 06, for hanging in perforated stainless steel cover or insert strip. (Type SD 04/SD 05/KB 04 only for RK 31/H and stainless steel perforated lid DE 08).
Insert baskets
KD 0 mesh width 1×1 mm, for small parts, for use in insert beakers. PD 04 floor mesh fabric, mesh width 1×1 mm. | Type | Version | fits | Ø mm | Order No. | (14) | KD 0 | Stainless steel | SD 06/09, EB 05, PD 06 | 75 | 96 07 36202 | (15) | PD 04 | Plastic | KB 04, SD 04, SD 05, SD 06, SD 09, EB 05, PD 06 | 60 | 96 07 36204 |
(16) Mounting clips
Made of stainless steel, for holding laboratory flasks in insert baskets, equipment and glass holders made from stainless steel with mesh size up to 12.5 × 12.5 mm.
(17) Adjustable handle
2 pcs., for insert baskets and equipment holder | Type | fits | Order No. | | GV 3 | K 1 C, K 3 C, K 3 CL, K 5 C, K 6 BL | 96 07 32879 | | GV 10 | K 10, K 10 B, K 14, K 14 B, K 28, K 28 C, GH 10, GH 28 | 96 07 32892 |
Plastic baskets
Bottom perforated, for cleaning parts with delicate surfaces. | Type | fits | Order No. | (18) | PK 2 C | RK 100/H, RK 102 H, DT 100/H, DT 102 H/H-RC, DL 102 H | 10 07 33082 |
Plastic basins
with lid – for cleaning in aggressive fluids. KW 3 and KW 5 are temperature resistant to max. 60°C. | Type | fits | Order No. | | KW 3 | RK 100/H, RK 102 H, RK 103 H, DT 100/H, DT 102 H/H-RC DT 103 H, DL 102 H | 96 07 38100 | | KW 5 | RK 255/H, DT 255/H/H-RC, DL 255 H | 96 07 38101 | | KW 10-0 | RK 510/H, DT 510/H/H-RC, DL 510 H | 96 07 38110 | (19) | KW 14 | DT/RK 514/H | 96 07 38102 | | KW 14 B | RK 514 BH, DT 514 BH, DT 514 BH/H-RC, DL 514 BH | 96 07 38103 | | KW 28-0 | RK 1028/H/C/CH, DT 1028/H/CH, DL 1028 H, ZE 1031/1032/… DT | 96 07 38104 | | KW 50-0 | RK 1050 | 96 07 38105 | | KW 50 B-0 | DT/RK 1050 CH | 10 07 38106 |
SONOREX special accessories for ultrasonic baths in medical applications
Stainless steel basket holder
KT 30 for insert basket K 29 EM or 1/1 DIN basket. | Type | fits | Order No. | | KT 30 | RK 1028/H, DT 1028/H, ZE 1031/1032/ … DT | 10 07 38330 |
Stainless steel insert baskets
4 × 4 mm mesh width, for placement on a holder | Type | fits | Order No. | (20) | K 29 EM | RK 1028/H DT 1028/H, DT 1058 M, ZE 1031/1032/1058/1059/ … DT | 96 07 38302 |
Silicone studded mats
For hanging baskets or insert baskets, for non-contact placement of instruments, especially micro instruments. SM 6 and SM 29 two pcs. each.
|
|