2mag - STIRRING DRYBATH 8-250 ERL Multiple heating stirring block for 8x 250 ml
La imagen es solo una referencia, puede diferir e incluir accesorios no disponibles en el producto.
Stirring-heating block combination with 8 stirring positions, 8 bore holes, ø 87.2 mm, depth 78 mm, distance 100 mm, suitable for 250 ml Erlenmeyer flasks.
Stirring - Maintenance-free and wear-free by inductive 2mag-Magnetic Drive concept, extremely wide speed range of 100 to 2,000 rpm, 100% synchronized speed, jerk-free stirring even at low speeds, 4-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.
Heating - Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximum heating temperature
+200 °C, PowerDetect for automatic compensation of physically determined loss in stirring power which can come up to 40% at high temperatures, specially made insulated stainless steel frame for energy- and time saving heating process, additionally for a homogenous temperature distribution and protection against accidental contact, independent over-temperature protection inside the plate.
Separate control unit for operation of magnetic stirrer and integrated heater, for
long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, stainless steel housing.
Inclusive 8 contact adapters for an optimized heat transfer.
Stirring positions: 8
Stirring positions distance: 100 mm
Bore holes Ø/T: 87.2 / 78 mm
Speed range: 100 - 2,000 rpm
Stirring volume/stirring point: 1 - 250 ml
Stirring power (max.): 40 W
Power setting: 10-step (10 – 100 %)
Temperature range: +40°C up to +200 °C
Material block: aluminium, PTFE-coated
Material housing: Stainless steel
Material sealing: Silicone
Operating voltage: 230 V
Heating power (max.) at 230 V: 1,150 W
Protection category: IP20
Dimensions (WxDxH): 335 x 515 x 150 mm
Weight (gross): approx. 40 kg
+ info Stirring - Maintenance-free and wear-free by inductive 2mag-Magnetic Drive concept, extremely wide speed range of 100 to 2,000 rpm, 100% synchronized speed, jerk-free stirring even at low speeds, 4-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.
Heating - Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximum heating temperature
+200 °C, PowerDetect for automatic compensation of physically determined loss in stirring power which can come up to 40% at high temperatures, specially made insulated stainless steel frame for energy- and time saving heating process, additionally for a homogenous temperature distribution and protection against accidental contact, independent over-temperature protection inside the plate.
Separate control unit for operation of magnetic stirrer and integrated heater, for
long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, stainless steel housing.
Inclusive 8 contact adapters for an optimized heat transfer.
Stirring positions: 8
Stirring positions distance: 100 mm
Bore holes Ø/T: 87.2 / 78 mm
Speed range: 100 - 2,000 rpm
Stirring volume/stirring point: 1 - 250 ml
Stirring power (max.): 40 W
Power setting: 10-step (10 – 100 %)
Temperature range: +40°C up to +200 °C
Material block: aluminium, PTFE-coated
Material housing: Stainless steel
Material sealing: Silicone
Operating voltage: 230 V
Heating power (max.) at 230 V: 1,150 W
Protection category: IP20
Dimensions (WxDxH): 335 x 515 x 150 mm
Weight (gross): approx. 40 kg
(-) Datos técnicos: | |
---|---|
Descripción de tipo de producto: | STIRRING DRYBATH 8-250 ERL |
Tipo de motor: | Campo magnético |
Unidad de refrigeración disponibles: | 40 °C |
Maximum operating temperature: | 200 °C |
Minimum rotation speed: | 100 min-1 |
Revoluciones máxima: | 2000 min-1 |
Capacidad de calefacción: | 1 kW |
Cantidad de agitación máxima recomendada: | 250 ml |
Tipo de protección (IP): | IP20 |
Suministro de voltaje: | 230 V AC |
Anchura: | 335 mm |
Profundidad: | 515 mm |
Altura: | 150 mm |
Temperatura ambiente: | -10 °C |
Cantidad de agitadores: | 8 |
- Fabricante: 2mag
- Artículo-núm.: 63825
- Categoría: Agitadores magnéticos multipunto
Show all Agitadores magnéticos multipunto from 2mag - Validez: 31.12.2024
- Última actualización: 31.12.2023